Monthly Archives:March 2017

Driving Recorder GPS device

Black Vehicle Traveling Driving Recorder GPS device support GSM GPRS communication modes

20 Mar 17
ecercom
No Comments
Vehicle Traveling Driving Recorder GPS device support GSM GPRS communication modes
I System introduction
GPS Vehicle traveling recorder is a set of the high performance MCU which consists of our many years’ vehicle electronic experiences, and the high researching and developing teams, it isa digital and electric recording device which records and stores driving speed, time, mileage and other information about vehicle driving and could export data through interface. Interior integrate the GPS module and GPRS/CDMA communication module, it could be upload the location information, over-speed, fatigue driving, doubtful data, dispatching the letter information, uploading the photos etc through GPRS / CDMA. GPS vehicle traveling recorder also named DB44 all in one device.
Working principle:
when the vehicle is moving, the GPS Vehicle traveling recorder receives satellite (GPS) signals to obtain information such as longitude, latitude, altitude, time, speed, direction and satellite service conditions through calculation, and transmits the aforesaid information to the remote scheduling and monitoring center (or data center) with GPRS/CDMA network, and then the vehicle administration department conducts real-time remote scheduling, monitoring and management through a website which integrates GIS electronic map or through a GPS scheduling, monitoring and management software.
Application area:
With compacted structure, our GPS Vehicle traveling recorderis installed easily, and enjoys high stability, high performance and price ratio and low power consumption. Being available for external SOS key, oil and power failure trigger switch, monitor MIC, handset, camera or oil flow sensor, vehicle driving recorder and navigator, etc., it is suitable for logistics industry, long-distance highway passenger transportation, hazardous materials transportation, bus company, vehicle leasing industry and taxi trade.
Communication Adapter

Communication Adapter 2 And Caterpillar Generator Parts Engine ET Tool 275-5121

20 Mar 17
ecercom
No Comments

Communication Adapter 2 And Caterpillar Generator Parts Engine ET Tool 275-5121

 

Detailed introduction toCAT Communications Adapter II 275-5121:

CAT Communications Adapter II 275-5121 is a professional Truck Diagnostic Tools

Caterpillar Communication Adapter dealer diagnostic for Caterpillar Equipment, Caterpillar ET /CAT ET Diagnostic Adapter (Multi languages)Carter-ET Scanner –Caterpillar Communication Adapter IICaterpillar ET /CAT ET Diagnostic Adapter (software version:2010A)Carter-ET Scanner –Caterpillar Communication Adapter II

Caterpillar Communication Adapter II is a CAT group dealer workshop diagnostic tool built to work with Caterpillar heavy vehicles and Caterpillar engines. This adapter connects any computer (notebook or PC) to CAT vehicle or engine and can perform all diagnostic services by Caterpillar ET (Electronic Technician – Caterpillar Electronic Technician) software.

CAT adapter can do diagnostic operations for all Caterpillar vehicle and engine models with electronic controls.

Communication:

Allows communication between service tools and engine controls using various data links such as J1939/11, DeviceNet (future release), CAT DataLink, and J1708 (ATA) vehicle networks;
Flash program allows adapter firmware upgrades as additional features become available;
Uses J1939/11, high-speed data link (part of ADEM III controls), substantially reducing flash times;
Automatically selects J1939/11 when flashing the engine (reduces the flash time approximately 80%, from 14 minutes to 3 minutes).

Software:

Designed to run with Microsoft Windows 95, 98, 2000, NT and XP
Ready to use, just install software program onto PC using provided CD

The latest version 2010A !

The PC-based service tools from Caterpillar provide the capability to access Electronic Control Modules (ECMs) from a personal computer. Many job-critical tasks can be performed with an electronic service tool. The user can display the status of a group of parameters (temperatures, pressures, etc.) simultaneously, view active and clear logged diagnostics, display the current configuration of an ECM and much more. The service tool works with a communication adapter to allow connection to an ECM. A graphical interface makes this software quick to learn and easy to use. A separate pull-down menu for each function enhances the a??ease of use.a?? The version and identification of the ECM is automatically retrieved and is displayed on a summary screen when the program is started. Diagnostic tests and calibrations can also be performed.
Caterpillar PC-based tools enable service technicians to reprogram ECMs, reconfigure control system parameters, fine tune performance or diagnose the root cause of a failure the first time. These powerful tools allow service personnel to display and analyze vital performance and health information from any system quickly and accurately. The service tool communicates with any system using ATA (J1708), J1939 or the Caterpillar proprietary data link networks. The service tools provide information and features needed to help a technician diagnose problems and perform repairs and to customize and personalize the operation of a product. By allowing customers to design flexibility and configurability into a product, Caterpillar service tools stretch beyond the capabilities of preprogrammed ECMs or onboard display systems.

Tablet Car Key Programmer

OBDSTAR DP PAD Tablet Car Key Programmer for Japanese and South Korean Vehicles Support Immobilizer+ Odometer Adjustment

20 Mar 17
ecercom
No Comments

OBDSTAR DP PAD tablet supplies a comprehensive diagnostic scheme for Japanese and South Korean vehicles.
OBDSTAR DP PAD features in powerful function and superior quality. Meanwhile, taking advantage of Android system,
DP PAD integrates more application and service, such as Maintenance Database, remote assistant, and One Key Update etc.

 

OBDSTAR DP PAD Tablet Car Key Programmer for Japanese and South Korean Vehicles Support Immobilizer+ Odometer Adjustment

OBDSTAR DP PAD Function:

Immobilizer+ odometer adjustment+ EEPROM/PIC adapter+ OBDII+ ABS+ TPS+ SRS reset+ TPMS(low tire)reset+ Steering angle
reset+ CVT learning/Value reset+ EPB+ Oil/service reset+ Battery matching+ Diagnosis(Japanese and Korean serials)

OBDSTAR DP PAD Vehicle coverage:

HIMIKO, MAZDA, HONDA/ACURA, HYUNDAI, ISUZU, KIA, MITSUBISHI, NISSAN/INFINITI, SSANGYONG, SUBARU, SUZUKI, TOYOTA/LEXUS etc.

OBDTAR DP PAD Software Update
One key upgrade:Free update for one year

81

Duplex Fiber Optic Connectors FC / APC Type Flame Retardant Boot For Optics Fiber Cable

13 Mar 17
ecercom
No Comments

Duplex Fiber Optic Connectors FC / APC Type Flame Retardant Boot For Optics Fiber Cable

 

Quick informations:

Connector type: FC/APC

Fiber mode: single mode (SM) 9/125

Cable dimeter: 0.9mm, 1.6mm, 1.8mm, 2.0mm, 3.0mm

Color: green

Ferrule: ceramic

 

Fiber Optic Connectors Descriptions:
– The FC connector holds a single fiber in a standard-sized (2.5 mm) ceramic ferrule.

– The connector body is made of nickel-plated brass, and features a key-aligned, threaded locking coupling nut for repeatable, reliable coupling.

– The threaded coupling nut provides a secure connector even in high-vibration environments, although it takes slightly longer to connect, since it requires turning the connector instead of a simple push and click. – — Some FC style connectors exhibit tunable keying, which means the connector key can be tuned to obtain the best insertion loss, or to otherwise align the fiber.

– We also can supply the FC connector for FTTH cable. The FC connector for FTTH cable is special design to use to produce the patch cord that use FTTH fiber optic cable. It is suiable to use the FTTH indoor cable or FTTH drop cable for outdoor. Its boot is available in green, blue and black color.

– Fiber Optic Connectors is the device connected with two optical fiber cables. It is face to face precision connecting in order to make the transmission fiber coupled to the receiving fiber. To make sure the transmission system and performance stable, the insertion loss and optical performance of fiber optic connector should be excellent.

 

Fiber Optic Connectors Applications:

Telecommunication Network, wide area networks.

Local Area Network(LAN).

Testing Equipment.

– Optical Switch interface connections
– Gigabit Ethernet
– CATV and WAN
– Testing Instrument, active device connection

– Premise Installations
– Telecommunication Networks

– Fiber to the home (FTTH)

Fiber Optic Connectors Features:

High quality ceramic components and Material.
End-face geometry requirement complies to Telcordia GR-326-CORE.
100% tested on optical performance (Insertion Loss & Return Loss).
Simplex, duplex and higher core densities.
900 micron, 2mm, 3mm cable applications.

– Low insertion loss

– High return loss

– Excellent repeatability

– Compact and anti-pull design
– High precision exact alignment
– UPC, PC or APC polished connectors

 

Details about Fiber Optic Connectors:

Connector Ferrule Ceramic
Alignment Sleeve Ceramic
Connector Body UL 94V-0 rated Thermoplastic to meet standard; amiability ratings
Crimp Insert/Crimp Tube Nickel-Plated Brass/Thermoplastic Elastomer Polymer
Dust Cap Nylon or PVC
Strain Relief Boot Flame retardant (UL-Rated 94-V0) polymer
Connector Style SC, FC, ST, LC, MTRJ, etc

 

Fiber Optic Connectors Specifications:

Item Single mode Multimode
PC UPC APC 62.5/125 50/125 50/125 10G
Insert Loss/connector
(single Fiber)
0.3dB Max. (0.2dB typ.) 0.3dB Max. (0.2dB typ.)
Return Loss ≥45 dB ≥50 dB ≥60 dB N.A
Insert Loss/MTRJ Connector 0.5dB Max. (0.45dB typ.) 0.5dB Max. (0.45dB typ.)
Pull Strength ≥98N ≥98N

 

Ordering Information:
1, Connector type: SC, LC, FC, ST, MTRJ, SMA, DIN, D4, etc
2, Polish: UPC, PC, APC
3, Mode: Single mode, Multimode
4, Fiber Count: Simplex or Duplex
5, Connector boot diameter: 0.9mm, 2.0mm or 3.0mm

81

FTTP 2 Core Optical Fiber Cable , Multimode Outdoor Optical Fiber Cable

13 Mar 17
ecercom
No Comments

FTTP 2 Core Optical Fiber Cable , Multimode Outdoor Optical Fiber Cable

 

Waterproof pigtail is a length of fiber with one-end connector, suitable for indoor & outdoor and adverse environmental condition.

 

1. Features:

 

Indoor and outdoor waterproof design

Single or multimode optional

PC/UPC/APC grinding

Connect to inddor and outdoor fiber optic cable or jumper

Tensile, resistance to corrosion, construction is convenient

Standard length of 3 meters or according to customer’s need

Conform to the Telcordia GR-326-CORE specification and Rohs standard

1.2, 4, 8 and 12-fiber count available(more than 12 counts are available upon request)

Standard 5/8-24 aluminum entry fitting is sealed with epoxy to protect against water penetration and

 

2. Applications:
FTTP
Telecommunication Network
CATV Network
Local Area Network
Active device termination
Data system network
FTTH CATV Optic fiber waterproof pigtail
water proof cables includes 4c, 6c,8c; SM, MM,ST,SC,LC,DIN,MTRJ/D4/MU/E2000, Polishing

 

3. Specifications:

 

Parameter PC-SM UPC-SM APC-SM PC-MM
Return Loss >=45dB >=50dB >=60dB >=20dB
Insertion Loss <=0.3dB <=0.3dB <=0.3dB <=0.3dB
Repeatability 1000 times <=0.2dB
Exchange <=0.2dB
Working Temperature -40~80oC
81

F Male To F Male RF Cable Assemblies 1GHz Frequency For Communication Equipment

13 Mar 17
ecercom
No Comments

F Male To F Male RF Cable Assemblies 1GHz Frequency For Communication Equipment

 

Detail Product Description

 

Frequency: 0 ~1 GHz

S.W.R: 2.0 Max.

Impedance: 75 ohm

Cable: RG 179 Cable, Brown

Connector: F Connector Male; F Connector Male

 

Application:

 

1. Wireless industries

2. Communication equipment

3. Base stations

4. Telecom

5. Test and measurement

 

Specification

 

A. Electrical Characteristics
Frequency DC~1GHz
Impedance 75 ohm
S.W.R 2.0 MAX @ 0~1GHz
Return Loss >=10dB
Insertion Loss <=1.5dB
B. Material & Mechanical Characteristics
Cable Type RG 179 Cable
Connector Type F Connector Male
Pull Test >= 5.0Kg
C. Environmental
Operation Temperature – 40 ˚C ~ + 65 ˚C
Storage Temperature – 40 ˚C ~ +80˚C

Characteristics and Reliability Test

Test Items Test Condition and Procedure Requirements
C1 S.W.R. Set DUT on Network Analyzer; make individual calibration to test Directive DUT specification
M1 Vibration MIL-STD-202G, 201A

Amplitude: 0.03 inch (0.76mm); Freq: 10 to 55 Hz

3 directions; 2 hours for each direction

1. No Visual Damage

2. Frequency Tol.<= 5%

M2 Random

Drop

Height: 1.5 Meter;

3 directions; 1 time for each direction

1. No parts separated

2. Frequency Tol.<= 5%

M3 Solderability MIL-STD-202G, 210F, cond. A

Solder iron: 350±10°C; Duration: 5 seconds

1. Mounted on PCB

2. No Visual Damage

M4 Terminal-

Pull Test

MIL-STD-202G, 211A, cond. A

Holding with individual specification; force applied

to axis of terminal

1. Directive DUT specification

2. Frequency Tol.<= 5%

M5 Dimension Inspection of dimension, color, material, package,

surface process

Directive DUT specification
E1 Salt Spray MIL-STD-202G, 101E, cond. B

Temp: 35°C; RH: >= 95%; NaCl solution: >= 5%;

Time: 48 hours

After 2 Hours Recovery

1. No Visual Damage

2. Frequency Tol.<= 5%

E2 Humidity MIL-STD-202G, 103B, cond. B

Temp: 40°C; RH: >= 95%; Time: 48 hours

After 2 Hours Recovery

1. No Visual Damage

2. Frequency Tol.<= 5%

E3 Thermal Shock 1 Cycle: – 40°C (30 minutes) to + 80°C (30 minutes)

Cycles: 24

After 2 Hours Recovery

1. No Visual Damage

2. Frequency Tol.<= 5%

E4 Life (High Temp.) MIL-STD-202G, 108A, cond. A

Temp: 85°C; Time: 96 hours

After 2 Hours Recovery

1. No Visual Damage

2. Frequency Tol.<= 5%

R1 RoHS With Reference to IEC 62321:2008 with flow chart Directive RoHS 2002/95/EC
R2 PFOS With Reference to USA EPA 3540C:1996 by LC/MS Directive RoHS 2006/122/EC
R3 PFOA With Reference to USA EPA 3540C:1996 by LC/MS Directive RoHS 2006/122/EC
81

100M Female RJ45 Modular Jack For Communication Equipments XMH-01D-E-LB3-1-770

06 Mar 17
ecercom
No Comments

100M Female RJ45 Modular Jack For Communication Equipments XMH-01D-E-LB3-1-770

 

Quick Details
1.HUB, PC card, Switch, Router
2.PC Mainboard, SDH, PDH, IP Phone, xDSL modem
3. Printed Circuit Board networking and communication equipments
4. packing: tray or tape&reel

1 X 1 Sigle Port Female RJ 45 Modular Plugs , 100M RJ 45 Connectors

Description:
1X1 Tab-up 10/100M RJ45 connector with leds, dimension: XMH-01D-E-LB3-1-770
1. Product Type Features:
1) Product Type = Connector
2) Jack Type = RJ45
3) Profile = Standard
4) PCB Mounting Orientation = SMT
2. Mechanical Attachment:
1) Jack Configuration = 1 x 1
3. Electrical Characteristics:
1) Shielded = Yes
4. Termination Related Features:
1) EMI Finger – Bottom = Without
2) Termination Method = Solder
5. Body Related Features:
1) Port Configuration = Single/Multi
2) EMI Fingers -Top and Sides = With/ Without
3) Latch Orientation = Standard – Latch Down
4) PCB Tail Length
6. Contact Related Features:
1) Preloaded = Yes
2) Contact Termination Type = Through Hole/Surface Mount
7. Housing Related Features:
1) Connector Style = Jack
8. Industry Standards:
1) RoHS/ELV Compliance = RoHS compliant, ELV compliant
2) Lead Free Solder Processes = Wave solder capable to 240°C,
Wave solder capable to 260°C, Wave solder capable to 265°C
3) RoHS/ELV Compliance History = Always was RoHS compliant
9. Identification Marking:
1) Left LED Color (Position #1) = Green – 250 ohm resistor
2) Right LED Color (Position #2) = Green – 250 ohm resistor
10. Conditions for Usage:
1) Applies To = Printed Circuit Board
2) Environmental Conditions = Office / Premises
3) Operating Temperature (°C ) = 0 – 70/-40 – +85
Applications:
Used for networking and communication equipments such as HUB, PC card, Switch, Router, PC Mainboard, SDH, PDH, IP Phone, xDSL modem
81

FTTP 2 Core Optical Fiber Cable , Multimode Outdoor Optical Fiber Cable

06 Mar 17
ecercom
No Comments

FTTP 2 Core Optical Fiber Cable , Multimode Outdoor Optical Fiber Cable

Waterproof pigtail is a length of fiber with one-end connector, suitable for indoor & outdoor and adverse environmental condition.

 

1. Features:

 

Indoor and outdoor waterproof design

Single or multimode optional

PC/UPC/APC grinding

Connect to inddor and outdoor fiber optic cable or jumper

Tensile, resistance to corrosion, construction is convenient

Standard length of 3 meters or according to customer’s need

Conform to the Telcordia GR-326-CORE specification and Rohs standard

1.2, 4, 8 and 12-fiber count available(more than 12 counts are available upon request)

Standard 5/8-24 aluminum entry fitting is sealed with epoxy to protect against water penetration and

 

2. Applications:
FTTP
Telecommunication Network
CATV Network
Local Area Network
Active device termination
Data system network
FTTH CATV Optic fiber waterproof pigtail
water proof cables includes 4c, 6c,8c; SM, MM,ST,SC,LC,DIN,MTRJ/D4/MU/E2000, Polishing

 

3. Specifications:

 

Parameter PC-SM UPC-SM APC-SM PC-MM
Return Loss >=45dB >=50dB >=60dB >=20dB
Insertion Loss <=0.3dB <=0.3dB <=0.3dB <=0.3dB
Repeatability 1000 times <=0.2dB
Exchange <=0.2dB
Working Temperature -40~80oC
81

MSHA Certified Leaky Feeder Cable , 75 ohm Mine Site Communication Cable MSHA leaky feeder cable

06 Mar 17
ecercom
No Comments

MSHA Certified Leaky Feeder Cable , 75 ohm Mine Site Communication Cable MSHA leaky feeder cable

Quick Details

  • High quality oxygen free copper 99.99%
  • Virgin grade PE insulation
  • Flame retardant jacket
  • Low smoke free halogen jacket is availiable
  • MSHA certificate

 

Description:

 

The standard length is 350m or 500m with a yellow outer jacket.The leaky feeder cable has a radiation pattern of 360 degrees around the cable and can be strapped directly to a centenary cable, water or air pipe. MSHA certified leaky feeder cable, Meet IEC1196 and EN50117.

As an option, the cable can be manufactured according to order with a blue color outer jacket and low smoke halogen free jacket is also available.

 

Applications:

  • tunnels
  • ships
  • In-building wireless systems.
  • perimeter detection
  • Mines underground communication system
  • metro stations

Specification:

 

NO. Items Technical Requirements
1 Inner conductor CU 2.31±0.03mm
2 Dielectric FPE 9.50±0.20mm
3 Outer conductor CU 16*0.60mm
4 Inner jacket PE 13.0±0.30mm
5 Outer jacket PVC 15.5±0.50mm
6 impedance 75±3Ω
7 Frequency 5-500 MHz
8 DC resistance inner conductor ≤4.1Ω/km
9 DC resistance outer conductor ≤3.9Ω/km
10 Capacitance Pf/m 51±2
11 Insulation resistance >10.4Ω/km
12 MIN. bend radius 150mm
13 Coupling loss(50%), dB 65±10
14 Operating temperature -40 to +70 centigrade
15 Attenuation@20℃

≤dB/100m

85 MHz ≤3.4dB
150 MHz ≤4.2dB
160 MHz ≤4.8dB
450 MHz ≤6.1dB